BAMBU 3D PRINTERS

Full-auto Calibration Multi-Color Printing (Combo Version) Active Flow Rate Compensation 1-Clip Quick Swap Nozzle Active Motor Noise Cancelling 256*256*256 mm³ Build Volume The upgraded heatbed cable features Kevlar reinforcement, thicker insulation, softer copper, optimized wire winding interval, Nylon sleeving and an extended strain relief....

Body Build Volume: 180 x 180 x 180 mm³ Chassis: Steel + Extruded Aluminum ToolHead Hot End: All-Metal Extruder Gears: Hardened Steel Nozzle: Stainless Steel Max Hot End Temperature: 300 ℃ Nozzle Diameter (Included): 0.4 mm Nozzle Diameter (Optional): 0.2 mm, 0.6 mm, 0.8...

The Bambu Lab AMS (Automatic Material System) is an accessory designed for Bambu Lab X1 and P1 series 3D printers. It enables automatic filament switching, allowing for multi-material and multi-color printing without manual intervention. Key Features: 4-Spool Capacity: Holds up to four different filaments...

Product Features Multi-Color/Multi-Material Capability Automatic Filament Backup Improved Spool Compatibility Easy to Maintain RFID Filament Sync The Bambu Lab AMS Lite is an Automatic Material System designed for the A1 series of 3D printers. It enables multi-color and multi-material printing by supporting up to...

Core XY with 20000 mm/s² acceleration Up to 16 multi-color printing Dual auto bed leveling 7μm lidar resolution Spaghetti failure detection AI inspected first layer Build Volume (W×D×H) 256 × 256 × 256 mm³* Nozzle 0.4 mm Hardened Steel Included Hotend All-Metal Max Hot...

Bambulabs X1 Carbon High quality printing with 7 μm Lidar Resolution Upgradeable and customizable flexibility High speed CoreXY with 20000 mm/s² Acceleration Dual Auto Bed Leveling Build Volume (W×D×H) 256 × 256 × 256 mm³* Nozzle 0.4 mm Hardened Steel Included Hotend All-Metal Max...

Product Features Works right out of the box, set up in 15 minutes Well-polished hardware and software Enclosed-body for high-temperature filament printing Up to 20000 mm/s² acceleration, prints a benchy in 18min Build-in camera for remote monitoring and timelapse All-around performance right out of...

Product Features Works right out of the box, set up in 15 minutes Well-polished hardware and software Enclosed-body for high-temperature filament printing Up to 20000 mm/s² acceleration, prints a benchy in 18min Build-in camera for remote monitoring and timelapse All-around performance right out of...

Product Features Full-auto Calibration. 4-Color Printing with AMS lite. Under 48 dB Low Noise in Silent Mode. Full-metal Linear Rails and Bearings. Vibration and Flow Rate Compensation. Item A1 mini Specification Body Build Volume(W*D*H) 180*180*180 mm³ Toolhead Hot End All-Metal Nozzle Stainless Steel Max...

Bambu Lab A1 Combo Multi-Color Printing Full-auto Calibration Active Flow Rate Compensation 1-Clip Quick Swap Nozzle Active Motor Noise Cancelling 256*256*256 mm³ Build Volu Item A1 Specification Body Build Volume(W*D*H) 256*256*256 mm³ Toolhead Hot End All-Metal Nozzle Stainless Steel Max Hot End Temperature 300...